2014년 2월 18일 화요일

HP0-Y16 덤프 HP 인증

지금 같은 정보시대에, 많은 IT업체 등 사이트에HP HP0-Y16인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의HP HP0-Y16자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.

ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.

ITExamDump의 HP인증 HP0-Y16시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 HP인증 HP0-Y16시험덤프로 어려운 HP인증 HP0-Y16시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.

HP인증 HP0-Y16시험은 등록하였는데 시험준비는 아직이라구요? HP인증 HP0-Y16시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의HP인증 HP0-Y16덤프와의 근사한 만남이HP인증 HP0-Y16패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의HP인증 HP0-Y16덤프로 시험패스에 고고싱하세요.

시험 번호/코드: HP0-Y16
시험 이름: HP (ProCurve Network Immunity Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2014-02-17

ITExamDump는 유일하게 여러분이 원하는HP인증HP0-Y16시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.

HP HP0-Y16인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.HP HP0-Y16시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는HP HP0-Y16관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸HP HP0-Y16관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게HP HP0-Y16응시하는데 많은 도움이 될 것입니다.

HP0-Y16 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y16.html

NO.1 Click the Exhibit button.
Given the information shown in the exhibit, what do you know about alerts on the 10.1.1.1 device over the
last five hours? (Note: The orange color corresponds with Major severity.)
A. The device has received only Major alerts.
B. The majority of alerts on the device are Major alerts.
C. The highest severity for an alert on this device is Major.
D. The most recent alert received on the device was a Major alert.
Answer: C

HP시험문제   HP0-Y16 pdf   HP0-Y16시험문제

NO.2 You want to display and print a list of all events related to the Policy Manager. What should you do?
A. From the Reports menu, select the Policy Events report.
B. In Interconnect Devices, click the Events tab; filter for Policy Manager; click the Print button.
C. From the Reports menu, select the Events report; filter for Policy Manager in the Report Wizard.
D. In Network Management Home, click the Events tab; filter for Policy Manager; click the Print button.
Answer: D

HP pdf   HP0-Y16덤프   HP0-Y16

NO.3 Click the Exhibit button.
What are reasons to configure the policy settings shown in the exhibit? (Select two.)
A. You want the policy to respond to threats from offenders within this group.
B. You want ProCurve NIM to apply the policy for threats detected in this group.
C. You have set the policy to a source group, so you must set the target group to match.
D. You want to enable dynamic local port mirroring on set ports, which compose this group.
E. The policy action is MAC Lockout, and you want to lock the offender out of the entire group.
Answer: DE

HP   HP0-Y16   HP0-Y16   HP0-Y16   HP0-Y16

NO.4 How does ProCurve NIM determine the severity level for a security alert?
A. from the violation count for the associated event
B. from the event, and the severity cannot be overridden
C. from the event, unless overridden by the alert configuration
D. from the event for trap events and from the alert configuration for other events
Answer: C

HP   HP0-Y16 dump   HP0-Y16   HP0-Y16

NO.5 Which statement is true about setting up an action for dynamic remote mirroring?
A. You should configure the mirror source before configuring the action.
B. You should configure the mirror destination before configuring the action.
C. You configure both the mirror source and destination as part of configuring the action.
D. You should configure both the mirror source and destination before configuring the action.
Answer: B

HP pdf   HP0-Y16인증   HP0-Y16 dumps

NO.6 When should the unified NIM + IDS deployment option be used?
A. to take immediate action to protect key resources and also track threats to the source
B. to add threat protection to the features of ProCurve NIM, which include only threat detection
C. to allow ProCurve NIM to mirror suspicious traffic to an external device for additional analysis
D. to protect against threats from wireless devices, which ProCurve NIM is not able to do on its own
Answer: C

HP   HP0-Y16덤프   HP0-Y16   HP0-Y16기출문제

NO.7 From which NBAD event should you often exclude your servers?
A. DNS Tunneling
B. TCP/UDP Fanout
C. Protocol Anomaly
D. Packet Size Deviation
Answer: B

HP   HP0-Y16자격증   HP0-Y16   HP0-Y16 pdf

NO.8 Which action can help you troubleshoot a policy in realtime from PCM?
A. Port Mirror
B. Notify (Email)
C. Message Dialog
D. Traffic Sampling
Answer: C

HP   HP0-Y16   HP0-Y16

NO.9 Which statement is true about the role that events play in ProCurve NIM?
A. When a particular event occurs, ProCurve NIM executes the corresponding alert.
B. When a particular event occurs, ProCurve NIM executes the corresponding policy.
C. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding alert.
D. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding policy.
Answer: C

HP   HP0-Y16   HP0-Y16

NO.10 Which features are provided in a ProCurve NIM standalone deployment? (Select two.)
A. threat mitigation without the aid of PCM+
B. resetting of TCP sessions when threats are detected
C. signature-based detection of worms and other attacks
D. applying mitigation actions near the source of the threat
E. application of different policies based on the threat's place of origin
Answer: DE

HP   HP0-Y16   HP0-Y16   HP0-Y16인증   HP0-Y16기출문제

NO.11 What is the intended purpose of the default traffic sampling action of ProCurve NIM?
A. to prevent ProCurve NIM from triggering false positives
B. to help PCM+/NIM periodically begin to monitor new ports
C. to send traffic for increased analysis to an Intrusion Detection System (IDS)
D. to allow ProCurve NIM to take immediate action against the most probable threats
Answer: B

HP dump   HP0-Y16   HP0-Y16

NO.12 By default, which NBAD event will trigger traffic sampling on a port?
A. Duplicate IP
B. Virus Throttle
C. Protocol Anomaly
D. Packet Size Deviation
Answer: D

HP자료   HP0-Y16시험문제   HP0-Y16   HP0-Y16   HP0-Y16

NO.13 How does a ProCurve Network Immunity Solution protect a network?
A. It deals with threats from authorized users.
B. It stops unauthorized users from connecting.
C. It customizes users' rights based on their identity.
D. It filters Web content and email while searching for viruses.
Answer: A

HP dumps   HP0-Y16 dump   HP0-Y16시험문제

NO.14 A network already has an Intrusion Prevention System (IPS) that is installed between a group of
servers and the rest of the network. Which benefits does ProCurve NIM add in a NIM + IPS deployment?
(Select two.)
A. deep packet inspection
B. signature-based detection
C. remediation of infected endpoints
D. protection for other resources throughout the network
E. applies actions closer to the point of origin of the attack
Answer: DE

HP기출문제   HP0-Y16   HP0-Y16   HP0-Y16기출문제

NO.15 Which tab is added to PCM+ when you install ProCurve NIM?
A. Policy Events
B. Security Audit
C. Event Browser
D. Security Activity
Answer: D

HP덤프   HP0-Y16   HP0-Y16 pdf   HP0-Y16기출문제   HP0-Y16

NO.16 You want to set up different external alerts based on the specific type of threat. Which settings can
help you accomplish this task? (Select two.)
A. Trap ID
B. Severity
C. Description
D. Anomaly ID
E. Violation Count
Answer: AC

HP   HP0-Y16   HP0-Y16 pdf   HP0-Y16자격증   HP0-Y16인증   HP0-Y16 pdf

NO.17 Click the Exhibit button.
You are configuring a Quarantine VLAN action.
Which area in the exhibit displays settings that allow ProCurve NIM to always place the offender in the
Quarantine VLAN?
A. a
B. b
C. c
D. d
Answer: D

HP pdf   HP0-Y16덤프   HP0-Y16   HP0-Y16   HP0-Y16자격증

NO.18 What is a feature of anomaly-based threat detection but not signature-based threat detection?
A. detecting worms
B. detecting DoS attacks
C. detecting protocol anomalies
D. detecting undocumented attacks
Answer: D

HP   HP0-Y16자료   HP0-Y16   HP0-Y16시험문제

NO.19 Your company's regulatory compliance group has asked you for a record of changes to the Policy
Manager policies. Which report should you generate?
A. Security Audit
B. Actions by Policy
C. Executed Policies
D. Automation (Policy) History
Answer: C

HP기출문제   HP0-Y16 dump   HP0-Y16   HP0-Y16자료   HP0-Y16 pdf

NO.20 ProCurve NIM was registering few TCP/UDP Fanout events. You have raised the sensitivity, and
many false positive TCP/UDP Fanout events are now triggered throughout the network. What should you
do next? (Select two.)
A. Lower the sensitivity to the previous level.
B. Remove the TCP/UDP alert from all policies.
C. Plan and create a Policy Manager policy to deal with false positive events.
D. Exclude the devices triggering the false positive events from the TCP/UDP fanout.
Answer: AD

HP   HP0-Y16   HP0-Y16자격증   HP0-Y16자료

NO.21 What might indicate that the sensitivity for IP fanout has been set too high?
A. IP Fanout events appear in the Events tab for almost every switch.
B. Although you do not see IP Fanout events, the IP Fanout alert triggers.
C. IP Fanout events appear in the Events tab for one switch but not others.
D. There are no IP Fanout events for days although you have configured an IP Fanout alert.
Answer: A

HP   HP0-Y16   HP0-Y16자료   HP0-Y16

NO.22 How do you configure PCM+ to generate periodic reports?
A. Select the Reports button in the global toolbar.
B. Enable the periodic reports setting in PCM+ Preferences.
C. Configure the schedule in the appropriate Reports Wizard.
D. Create policies with schedule-driven alerts and report actions.
Answer: D

HP시험문제   HP0-Y16덤프   HP0-Y16자료   HP0-Y16

NO.23 Which misconfiguration on PCM+ causes ProCurve NIM to fail to detect any anomalies in traffic?
A. the wrong sFlow version
B. an incorrect operator password
C. an incorrect manager password
D. an incorrect SNMP community name
Answer: D

HP인증   HP0-Y16   HP0-Y16   HP0-Y16

NO.24 What must you do to configure a Port Rate Limit action?
A. Set the rate limit as a percentage.
B. Set the rate limit as a QoS priority value.
C. Set the rate limit as an absolute value in Kbps.
D. Enable the limit, leaving the rate to be determined by the switch configuration.
Answer: A

HP   HP0-Y16   HP0-Y16시험문제

NO.25 Click the Exhibit button.
Which port in the exhibit should you select in PCM+ and configure as the mirror destination?
A. 1
B. A6
C. X0
D. B16
E. 25-48
Answer: B

HP   HP0-Y16자료   HP0-Y16   HP0-Y16덤프

NO.26 Which threat mitigation action is supported on ProCurve wireless devices?
A. Port Disable
B. MAC Lockout
C. Port Rate Limit
D. Quarantine VLAN
Answer: B

HP pdf   HP0-Y16   HP0-Y16시험문제

NO.27 Which events can be signs of an unauthorized port scan? (Select two.)
A. Port Anomaly
B. DNS Tunneling
C. TCP/UDP Fanout
D. UDP Protocol Anomaly
E. TCP Protocol Anomaly
Answer: CE

HP   HP0-Y16   HP0-Y16   HP0-Y16자료

NO.28 What is a reason to create a custom group for a server zone and set that group as the source for a NIM
policy?
A. Servers handle more mission-critical traffic, so you set less drastic actions.
B. Servers trigger more false positives, so you set the NBAD sensitivities lower.
C. Threats are targeted to servers at all times, so you set the policy to any time.
D. Threats that are targeted to servers are more serious, so you set harsher actions.
Answer: A

HP   HP0-Y16 dumps   HP0-Y16덤프   HP0-Y16덤프

NO.29 Which alert can be triggered by SNMP traps sent by ProCurve switches?
A. default External
B. default IP Fanout
C. default IP Spoofing
D. default Virus Throttle
E. default ProCurve SNMP
Answer: D

HP   HP0-Y16   HP0-Y16인증

NO.30 What should you do to set up your network infrastructure for remote mirroring?
A. Enable jumbo frames.
B. Enable frame fragmentation.
C. Raise the maximum transmit unit (MTU).
D. Reserve uplink ports for the mirroring session.
Answer: A

HP   HP0-Y16   HP0-Y16   HP0-Y16 dump   HP0-Y16자료

ITexamdump의 000-350덤프의 VCE테스트프로그램과 HP2-B101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-303시험에 대비한 고품질 덤프와 312-50v8시험 최신버전덤프를 제공해드립니다. 최고품질 CAT-440시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y16.html

댓글 없음:

댓글 쓰기