2013년 12월 23일 월요일

JN0-533 덤프 Juniper 자격증 덤프

ITExamDump의 Juniper인증 JN0-533덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Juniper인증 JN0-533덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Juniper인증 JN0-533로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.

IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. Juniper인증 JN0-533시험이 아무리 어려워도ITExamDump의Juniper인증 JN0-533덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의Juniper인증 JN0-533덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.

IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. Juniper인증 JN0-533시험은 널리 승인받는 자격증의 시험과목입니다. Juniper인증 JN0-533덤프로Juniper인증 JN0-533시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.

ITExamDump는 유일하게 여러분이 원하는Juniper인증JN0-533시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.

ITExamDump에서 최고최신버전의Juniper인증JN0-533시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Juniper인증JN0-533시험을 패스하실 수 있습니다.Juniper인증JN0-533관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

Juniper인증 JN0-533시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Juniper인증 JN0-533시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Juniper인증 JN0-533덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.

ITExamDump의Juniper인증 JN0-533시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Juniper인증 JN0-533시험대비덤프를 제공해드립니다.

시험 번호/코드: JN0-533
시험 이름: Juniper (FWV, Specialist (JNCIS-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2013-12-22

JN0-533 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-533.html

NO.1 -- Exhibit -set admin name "admin" set admin password "nOsYMqrbAs/McFsJrs6HwcIt3AF6yn"
set admin user "User1" password "nLZwKErINPPCcphC6sFMXrJ" privilege "read-only" set admin port
8080 set admin access attempts 5 set admin access lock-on-failure 5 set admin auth web timeout 10
set admin auth server "Local" -- Exhibit -
User1 wants to create the policy in the ScreenOS device, but is not successful. Referring to the
exhibit, what is the problem?
A. The User1 account has been suspended.
B. User1 does not have any account in this device.
C. User1 logged in to the device with wrong port.
D. User1 does not have the proper permission to create a policy.
Answer: D

Juniper   JN0-533   JN0-533   JN0-533최신덤프   JN0-533   JN0-533

NO.2 Which two statements are true about policy-based VPNs as compared to route-based IPsec
VPNs when using ScreenOS devices? (Choose two.)
A. For policy-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
B. For route-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
C. For route-based IPsec VPNs, the proxy ID is derived from the policy.
D. For policy-based IPsec VPNs, the proxy ID is derived from the policy.
Answer: B,D

Juniper dumps   JN0-533   JN0-533

NO.3 You want to set up a last resort route and prevent route lookups in either the source-based
routing table or the destination-based routing table.
What should you do?
A. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a higher metric than other routes.
B. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a lower metric than other routes.
C. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a higher metric than other routes.
D. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a lower metric than other routes.
Answer: C

Juniper자료   JN0-533최신덤프   JN0-533   JN0-533자료   JN0-533

NO.4 Which two configuration elements are synchronized between the members of an NSRP cluster?
(Choose two.)
A. interface IP addresses
B. hostname
C. track IP configuration
D. static routes
Answer: A,D

Juniper   JN0-533최신덤프   JN0-533 dumps   JN0-533기출문제   JN0-533 pdf   JN0-533

NO.5 Click the Exhibit button.
Which two statements are true regarding the route shown in the exhibit? (Choose two.)
A. 5.5.5.0/ 24 was configured as a source route with a next-hop IP address of 1.1.1.1 in the trustvr.
B. 5.5.5.0/ 24 was configured as a destination route with a next-hop IP address of 1.1.1.1 in the
trust-vr.
C. 5.5.5.0/ 24 was configured as a SIBR route with a next-hop IP address of 1.1.1.1 in the trust-vr.
D. 5.5.5.0/ 24 was configured as a permanent source route.
Answer: A,D

Juniper인증   JN0-533   JN0-533 dumps

NO.6 Click the Exhibit button.
Referring to the exhibit, what is the appropriate VPN monitor status?
A. The VPN is active and the peer is down.
B. The VPN is active and VPN Monitor is not configured for the peer.
C. The VPN is active and the peer is up.
D. The VPN is inactive and VPN Monitor is not configured for the peer.
Answer: B

Juniper기출문제   JN0-533최신덤프   JN0-533

NO.7 Which two statements are true about VPN Monitor on a ScreenOS device? (Choose two.)
A. With a route-based VPN failure, VPN Monitor marks the tunnel interface status as down.
B. With a policy-based VPN failure, VPN Monitor marks the tunnel interface status as down.
C. VPN Monitor uses UDP to detect a VPN connection failure.
D. VPN Monitor uses ICMP to detect a VPN connection failure.
Answer: A,D

Juniper   JN0-533인증   JN0-533   JN0-533

NO.8 HostA is in the Trust zone and has an IP address of. ServerA is a Web server in the DMZ zone
and has an IP address of.
Which three configuration statements are required to allow traffic from HostA to communicate with
ServerA? (Choose three.)
A. ssg5-> set address Trust HostA / 32
B. ssg5-> set policy from DMZ to Trust ANY ANY ANY permit
C. ssg5-> set address DMZ ServerA / 32
D. ssg5-> set policy from Trust to DMZ HostA ServerA HTTP permit
E. ssg5-> set address Trust HostA / 32
Answer: C,D,E

Juniper   JN0-533덤프   JN0-533덤프

NO.9 You have configured integrated Web filtering in the ScreenOS software. A URL appears in the
blacklist, the whitelist, and a user-defined category. Additionally, the device can obtain
categorization information from the SurfControl server.
Which configuration will the device use to determine the action to take for Web requests for the
URL?
A. the blacklist
B. the SurfControl categorization
C. the user-defined category
D. the whitelist
Answer: A

Juniper기출문제   JN0-533 dump   JN0-533최신덤프   JN0-533자격증

NO.10 Click the Exhibit button.
In the exhibit, you have configured the MIP address 1.1.8.64 on a ScreenOS device.
Which statement is correct?
A. It performs one-to-one address translation and maps 1.1.8.64 to 10.1.10.64.
B. It performs one-to-many address translation and maps 1.1.8.64 to a range from 10.1.10.64 to
10.1.10.71.
C. It performs range address translation and maps 1.1.8.64 to 10.1.10.64, 1.1.8.65 to 10.1.10.65,
etc..
D. It performs address translation using a random IP address from the pool for 10.1.10.64 / 29.
Answer: C

Juniper   JN0-533   JN0-533   JN0-533기출문제

ITexamdump의 HP2-B104덤프의 VCE테스트프로그램과 C-TSCM62-64덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-653시험에 대비한 고품질 덤프와 NS0-156시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-145시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-533.html

댓글 없음:

댓글 쓰기