IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. Dell인증 DC0-200시험은 널리 승인받는 자격증의 시험과목입니다. Dell인증 DC0-200덤프로Dell인증 DC0-200시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
여러분은 먼저 우리 ITExamDump사이트에서 제공되는Dell인증DC0-200시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Dell인증DC0-200시험을 패스하도록 하겠습니다. 만약Dell인증DC0-200시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
Dell인증 DC0-200시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. Dell인증 DC0-200시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의Dell인증 DC0-200덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의Dell인증 DC0-200덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.
시험 번호/코드: DC0-200
시험 이름: Dell (Certified Server Professional Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-09-12
ITExamDump는Dell DC0-200시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Dell DC0-200시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Dell DC0-200시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
여러분은 우선 우리 ITExamDump사이트에서 제공하는Dell인증DC0-200시험덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용전부를 환불해드립니다.
DC0-200 덤프무료샘플다운로드하기: http://www.itexamdump.com/DC0-200.html
NO.1 Which two operations can be performed with the DSA CD? (Choose two.)
A. run system diagnostics on your server
B. create Windows 2000 driver/utilities diskette(s)
C. create NetWare 5.1/6.0 driver/utilities diskette(s)
D. change the Dell Service Tag via the Service Tag Utility
Answer: BC
Dell DC0-200 DC0-200 DC0-200 DC0-200자료
NO.2 What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
A. You specify which adaptor will take the entire load. The other NICs will be used only when the
Preferred Primary fails.
B. You specify the desired card for all outgoing traffic for the team. The other members will still accept
incoming packets.
C. You specify the desired card for all incoming traffic for the team. The other members will still transmit
outgoing packets.
D. You specify which adaptor will take the load until it is saturated, then the other members will start
accepting packets until the Preferred Primary is just below the saturation point.
Answer: A
Dell DC0-200자격증 DC0-200인증 DC0-200 DC0-200
NO.3 Which three hard drive partitions must be defined during the automated Linux installation process?
(Choose three.)
A. root
B. logs
C. boot
D. data
E. swap
Answer: ACE
Dell DC0-200 dump DC0-200시험문제 DC0-200
NO.4 What is the default path and name of the logging file if the Message Logging option is selected when
running diagnostics?
A. A: RESULT.txt
B. C: RESULTS.txt
C. C: DELLTEST.txt
D. A: DELLTESTS.txt
Answer: A
Dell pdf DC0-200 dumps DC0-200 DC0-200시험문제
NO.5 Which statement is true about using the Save feature of BASP?
A. It is only available in Windows 2000.
B. It saves a configuration as an executable file.
C. It lets you transfer teaming configurations to other servers.
D. It is used to install and configure the Broadcom Ethernet Controller driver.
Answer: C
Dell DC0-200 DC0-200시험문제 DC0-200자료
NO.6 How many PowerEdge 1650 servers can be installed in a Dell 42U rack that already has two
PowerEdge 2650 servers, a PowerEdge 6650 server, and a 1U keyboard and monitor drawer?
A. 31
B. 32
C. 33
D. 34
Answer: C
Dell시험문제 DC0-200 DC0-200 DC0-200
NO.7 You are about to begin the installation of Windows 2000 Server on your PowerEdge server . As you
inspect the System Setup Utility, you notice that the Asset Tag field is blank. What are two ways you can
add the correct asset tag into the BIOS? (Choose two.)
A. Flashing the ESM to the latest revision automatically updates the Asset Tag field.
B. Flashing the BIOS to the latest revision automatically updates the Asset Tag field.
C. You create the Asset Tag Utility Diskette from the DSA CD and use it to update the Asset Tag field.
D. You download the Asset Tag Utility from premiersupport.dell.com and use it to update the Asset Tag
Field.
E. After installing Windows 2000, you use the Asset Manager application from the Dell group in control
panel to update the Asset Tag field.
Answer: CD
Dell시험문제 DC0-200 DC0-200자격증 DC0-200 dump
NO.8 Which two components can be installed in the 0U space found in Dell racks? (Choose two .)
A. Dell UPS
B. Dell PDU
C. Dell flat panel monitor
D. Dell Dual-Power Grid Switch
Answer: BD
Dell dump DC0-200자료 DC0-200 pdf DC0-200
NO.9 You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
A. system setup
B. PERC BIOS
C. CERC BIOS
D. Array Manager
Answer: B
Dell dump DC0-200 DC0-200 DC0-200 DC0-200최신덤프
NO.10 You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed
and you do not know what network adapters are in the system. Without physically opening the chassis,
what are two ways to see which network adapters are installed using the operating system? (Choose
two.)
A. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be
named
B. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will
be named
C. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and
view installed adapters
D. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view
protocol-bound adapters
Answer: BC
Dell DC0-200최신덤프 DC0-200자료 DC0-200 DC0-200덤프
NO.11 Which benefit does Link Aggregation provide, as used by Intel NICs in PowerEdge servers?
A. provides load-balanced fault tolerance to the network
B. assures that if one adapter fails, the server remains available to the network
C. combines multiple adapters into one channel, providing greater bandwidth for network traffic
D. allows multiple adapters to share the network load, preventing one adapter from being overloaded
Answer: C
Dell DC0-200 DC0-200 pdf DC0-200
NO.12 You have just installed W2K on your server and you cannot get the server to see your local network.
What can you do to diagnose network connectivity? (Choose three.)
A. verify that the server is configured to use DNS
B. verify that the cable plugged into your server is not a cross-over cable
C. verify that the subnet address is the same as the rest of the working devices on your LAN
D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: BCD
Dell자격증 DC0-200 DC0-200 DC0-200 DC0-200자격증 DC0-200
NO.13 You need to install Intel NIC teaming for Windows 2000 and you do not have access to the Internet.
From what two sources can you obtain the PROSet software? (Choose two.)
A. Intel Network Drivers CD
B. Dell Server Assistant (DSA)
C. Dell Network Applications CD
D. Windows 2000 Installation CD
Answer: AB
Dell DC0-200 pdf DC0-200 pdf DC0-200 DC0-200
NO.14 What is the correct NIC teaming for the Intel Proprietary Method to accomplish fault tolerance?
A. AFT
B. ALB
C. ATF
D. SLB
Answer: A
Dell DC0-200 DC0-200 DC0-200 dumps DC0-200
NO.15 What is the intended mounting location for a 0U rack mount device in a Dell rack?
A. at the top of the rack
B. on the back doors of the rack
C. in any of the 42U spaces available
D. in the mounting holes in the side walls of the rack
Answer: D
Dell기출문제 DC0-200 DC0-200기출문제 DC0-200 DC0-200 dumps
NO.16 Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
A. set the media type for the adapters
B. create a team and assign it a name
C. select the adapters from the list to add to the team
D. select the Broadcom Advanced Server Program Driver
E. configure the IP address and subnet mask for the team F. enter the path and filename of the
configuration to be saved
Answer: BCDE
Dell DC0-200 dumps DC0-200최신덤프
NO.17 You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices
using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
A. boot to the Dell Server Assistant CD after installing Windows 2000
B. autorun the CD from the Windows desktop after installing Windows 2000
C. boot to the Dell Server Assistant CD and have your Windows CD available
D. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility
Partition
Answer: C
Dell pdf DC0-200 DC0-200
NO.18 Which two features are found on both 24U and 42U Dell racks? (Choose two.)
A. split rear door for cable access
B. diagnostic LCD panel on the front door
C. integrated redundant 1000 watt power supplies
D. 0U space that can be used for components other than servers and storage
Answer: AD
Dell DC0-200 DC0-200
NO.19 Which tool can be used to create a Utility Partition?
A. DOS fdisk Utility
B. Dell Server Assistant CD
C. Dell OpenManage Array Manager
D. Dell OpenManage IT Assistant CD
Answer: B
Dell시험문제 DC0-200 DC0-200 DC0-200자료
NO.20 Which three statements are true about installing the Intel drivers and utilities that allow teaming in
Windows 2000? (Choose three .)
A. You must install the ProSet Utility.
B. You must install the Intel driver using floppy diskettes.
C. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel
Network Drivers CD.
E. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel
ProSet Utility CD.
Answer: ACD
Dell자격증 DC0-200 dump DC0-200
ITexamdump의 MB2-866덤프의 VCE테스트프로그램과 BAS-013덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-318시험에 대비한 고품질 덤프와 JN0-633시험 최신버전덤프를 제공해드립니다. 최고품질 CUR-009시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기